Welcome to Qingdao Yakai Automotive Industry and Trade Co., Ltd.

Semi trailer refrigerated truck

Product features:

Light weight, good economic benefits
1. Totally enclosed polyurethane plate is used to bond FRP structure.
2. There is no metal framework and connector for refrigerated and insulated vehicles.
3. The car body is lighter than the similar products, which can effectively reduce the transportation cost.
Strong structure, durable
1. The chamber body is made of high molecular polyester material by hot pressing, and adopts a fully enclosed structure.
2. The integrated internal stiffener greatly increases the strength of the panel.
3. The plate is bonded with high strength and high sealing adhesive to form a whole and has good corrosion resistance.
Good thermal insulation performance to meet the transportation needs
1. Sandwich pressing method is adopted to ensure that there is no air gap in the board
2. There is no metal cold bridge and the thermal conductivity is low

Inquire
Product parameters
TermSemi refrigerated trailer
DIMENSIONS & WEIGHTSOverall size: 13600*2600*4000mm
Inner size: 13434*2462*2610mm
Fifth wheel height: 1, 300 mm.
Front overhand: 470 mm.
1.2 Weights and loads
Max. Payload: 32, 000 kg
Tare Weight approx.: 4520 kg
RUNNING GEARSuspension System: 

FUWA mechanical tandem suspension capacity 2× 14T, 

with 6 x 8 plate springs, 16mm thickness and 90mm width

Axles:
FUWA axles 2 × 13T with drum brakes S-Cam 420× 200
Wheels:
8.0V20, 10 holes for tube tyres 12.00-20; Made in China
Tyres:
Triangle tire, 12.00-20, 9 units, made in China
King pin
Forged steel, 3.5", welded in.
Landing Gear
Jost 19, 2 speed, 24T lifting capacity.
CHASSISMain Beams

Designed to carry 1 x 40 ft, 

or 1 x 20 ft., 

or 2 x 20 ft...Provided with 12 Nos. 

Retractable type Multilock twist locks

500mm height, Low Alloy (Q345 ) by automatic submerged arc welding; 

Top Flange 14mm, Botton Flange 16mm, Middle Flange 6mm.

Surface preparation & painting: 

On completion of fabrication, all steel parts are steel blasted to to SA 2.5, 

then Two Synthetic Enamel Finish Paint, Single color as per customers choice

LIGHT SYSTEM: 

Standard electrical equipment 24V with rear lights on bumper,

 electric connection type SEA 7 poles mounted on the front bearer.

BRAKE SYSTEM:WABCO relay emergency valve indirectly to two tank system (ABS system). 
ACCESSORIESSPARE WHEEL HOLDER(WINCH)
REAR BUMPER; 
RUBBER MUD FLAPS BEHIND REAR WHEEL.
COLOURAs your require


Inquire Now